Skip to content
Source: Nature

🔬Diamond Maser Amplifier Hits 30 dB Gain Near Quantum Limit at 6.6 GHz

Room-temp-adjacent quantum amplifiers just got a non-superconducting option

TL;DR

Researchers built a diamond-based maser amplifier with over 30 dB gain and noise just 2.55 quanta above the standard quantum limit. It works in strong magnetic fields where superconducting amplifiers struggle, opening a non-superconducting route for qubit readout and axion searches.

Superconducting amplifiers have been the default for quantum readout, but they can't tolerate strong magnetic fields. A new diamond maser amplifier suggests a different path: a loop-gap resonator holding a diamond crystal with P1 centres, operating at 6.595 GHz and delivering over 30 dB of power gain. Why should you care? If you're building or tuning spin-qubit readout chains, or running magnetic-resonance spectroscopy, this device can operate in strong static fields of arbitrary orientation. That's the constraint that breaks most superconducting parametric amplifiers. Dark-matter axion experiments face the same wall. The numbers: added noise is about 2.55 quanta above the standard quantum limit, the 1 dB output compression point sits at -63 dBm, and the device was thermalised to 13 mK in a dilution refrigerator. The previous best in this frequency class was a ruby maser at 1.43 K noise temperature. Watch whether the design scales beyond a single resonator and whether the dilution-fridge requirement limits deployment.

Diamond Maser Amplifier Hits 30 dB Gain Near Quantum Limit at 6.6 GHz — Nature

Key Points

1

The loop-gap resonator at 6.595 GHz houses a diamond crystal with about 16 ppm of P1 centres acting as the active medium for amplification.

Keep reading — it's free

Enter your email to keep reading — plus the best of AI & tech, daily. Free, forever.

Also get
or

Already a member? Sign in

maserdiamondquantum-amplifiernv-centersqubit-readout

Comments

Subscribe to join the conversation...

Be the first to comment